Need help?Do you have a question about the Dascom TALLY MIP480 and is the answer not in the manual?
Lists key printer features and options available.
Lists available printer configurations and optional modules.
Identifies major printer components and control panel functions.
Summarizes status indications and operations of the control panel in Normal mode.
Explains how the printer handles single sheets and continuous forms.
Lists specifications for paper size, thickness, and number of copies.
Details how to adjust the print gap lever for different paper thicknesses.
Describes how to load and use continuous forms paper with the printer.
Describes the process of loading and using single sheets of paper in the printer.
Defines print area parameters like Top-of-Form, Form Length, and margins.
Details how to switch between continuous forms and single sheets of paper.
Covers the procedures for starting, stopping, and resuming printing operations.
Describes methods for removing single sheets or continuous forms paper after printing.
Details the printer's power-saving sleep mode features and operations.
Summarizes the purpose of various special mode functions like Setup, Print Config, etc.
Provides instructions on how to access the printer's special mode.
Explains the capabilities and purpose of the printer's Set-Up mode.
Details available Macro options and their corresponding values for printer configuration.
Lists and describes options available within the INSTALL function for printer setup.
Describes how to reset printer settings to factory defaults.
Introduces diagnostic functions like Print Configuration and Hex Dump.
Guides on adjusting print alignment for bidirectional printing quality.
Details how to fine-tune the Top-of-Form origin for print positions.
Explains how to adjust the first dot position for the left margin.
Initializes the printer to its standard default settings.
Explains how to clean and vacuum the printer to remove dust and particles.
Details the procedure for removing and installing a new ribbon cartridge.
Explains how to replace the printer's print head if characters are not printing correctly.
Lists common print quality issues and provides suggested solutions.
Addresses common paper loading and feeding issues and their resolutions.
Covers operational issues like the printer not turning on or not printing.
Describes fatal errors that can cause the printer to stop or turn off.
Guides on checking and correcting vertical print alignment for bidirectional printing.
Lists available printer supplies such as ribbon cartridges.
Lists optional accessories that can expand the printer's capabilities.
Details the physical dimensions, weight, and enclosure of the printer.
Outlines the printer's functional capabilities, including print method and paper handling.
Lists performance metrics like print speed, ribbon life, and MTBF.
Details specifications related to paper size, type, and print area.
Provides information on allowable paper thickness for various paper types.
Provides a quick reference for IBM 2390+ emulation printer commands.
Offers a quick reference for Epson EP2 emulation printer commands.
Details the serial interface pin assignments and cable requirements.
Lists selectable serial communication options like speed, data bits, and parity.
Explains buffer control methods (XON/XOFF, DTR) for secure data transmission.
Provides features and pin assignment details for the USB interface.
Details specifications for the optional IEEE 802.11B/G wireless interface.
Lists character sets common to both IBM Proprinter and Epson-EP2 emulations.
Details character sets for IBM Proprinter emulation, including Set 1 and Set 2.
Describes national character sets available for Epson-EP2 emulation.
General| Print Technology | Dot Matrix |
|---|---|
| Print Speed | 480 characters per second |
| Print Resolution | 360 x 360 dpi |
| Print Width | Up to 13.6 inches |
| Number of Pins | 24 pins |
| Paper Handling | Continuous forms |
| Connectivity | USB, Parallel |
| Weight | 4.5 kg |
To Next Page
