Using Special Mode
4-11
Macro Options and Values
•
Values in bold are the factory settings.
• Some settings are overridden by commands from the computer.
• Options that differ by emulation are described at the end of the table.
MACRO Options Description
<EMULATION> Select the same emulation as that selected by your soft-
ware.
EPSON-EP2 Epson printers using the EP2 emulation
IBM 2390+ IBM 2390+ printers
6820 6820 mode (Standard model doesn’t support this func-
tions)
PORT DEPEND The printer selects emulation according to the active inter-
face (such as serial, USB). See the next options.
<EMUL SERIAL> Select an emulation for the Serial interface. This is invalid
and skipped when PORT DEPEND is not selected for the
<EMULATION> option.
Epson-EP2 EP2 (factory setting)
IBM 2390+ IBM Proprinter 2390+ printers
6820 Not valid in Standard model
<EMUL USB> Select an emulation for USB interface. This is invalid and
skipped when PORT DEPEND is not selected for the
<EMULATION> option.
Epson-EP2 EP2 (factory setting)
IBM 2390+ IBM Proprinter 2390+ printers
6820 Not valid in Standard model
<EMUL WIRELESS> Select an emulation for the Wireless interface. This is
invalid and skipped when PORT DEPEND is not selected
for the <EMULATION> option.
Epson-EP2 EP2 (factory setting)
IBM 2390+ IBM Proprinter 2390+ printers
6820 Not valid in Standard model
<EMUL BLUETOOTH> Select an emulation for the Bluetooth interface. This is
invalid and skipped when PORT DEPEND is not selected
for the <EMULATION> option.
Epson-EP2 EP2 (factory setting)
IBM 2390+ IBM Proprinter 2390+ printers
6820 Not valid in Standard model
<FONT> Select a font to be active when the power is turned on. For
fixed-spaced fonts, be sure to change the horizontal pitch
as well.
DRAFT Draft font (lower resolution than letter quality, 3 times the
speed of letter quality)
COURIER Courier font
To Next Page
Loading...
