Interface Information
D-3
Serial Options
The serial options for the computer and the printer must match. Use the printer control
panel, the computer operating system, or your software to change options specified as
“selectable.”
Transmission Asynchronous, full duplex
Speed 4800, 9600, 19200 or 38400 baud (selectable)
Data bits 7 or 8 bits (selectable)
Parity bit Even, odd, or none (selectable)
Start bit 1 bit
Stop bit 1 or 2 bits (selectable)
Buffer control XON/XOFF (DC1/DC3) or DTR (Data Terminal Ready) (selectable)
Buffer size 2K, 8K, 16K, 32K, or 64K bytes (selectable)
To Next Page
Loading...
