Dascom TALLY MIP480 - Entering Special Mode

Using Special Mode
4-2
Entering Special Mode
To enter Special mode:
1 Make sure that the tractors are loaded with continuous feed paper and that the paper
select lever is set backward.
2 Turn the printer off.
3 Turn the printer ba
ck on and immediatley press each keys:
Function
Load/
FF
Park Alt
Ready/
Clear
Setup Mode
•
Print Configuration
•
Printing Test
•
Hex Dump Mode
••
Printing Alignment Adjustment
••
Top Adjustment
•
Setting of The First Dot Position on The Left
Side
•••
Menu-Access
•••
Setting Setup Mode to Default Value (Stan-
dard)
••
Setting Setup Mode to Default Value (6820)
••