Dascom TALLY MIP480 - Printer and Paper Specifications; Physical Specifications

B-1
B
Printer and Paper Specifications
This appendix provides the physical, functional, and performance specifications for your
mobile printer. It also contains detailed paper specifications.
Printer Specifications
Physical Specifications
Dimensions (vertical orientation) Height: 320 mm
Width: 360 mm
Depth: 130 mm
Enclosure is injection molded plastic with hinged cover for
access to paper loading, print head and ribbon replacement.
Enclosure provides edge for paper to tear off.
Color Night Sky Grey
Weight Not to exceed 5.0 kg
Power requirements Automotive, 12 VDC/24VDC
(10.5 – 28 VDC)
110/220 VAC as option
Power consumption Not to exceed 150 Watts
Interface and connectivity USB2.0 full speed, RS232
and Blue Tooth Class 2 ver1.2 (Standard)
IEEE 802.11b (Option)
Data buffer size 64K bytes
Operating environment
Storage
-4 ºF +140 ºF (-20 ºC to + 60ºC)
30% – 80% Relative Humidity, no condensation
-22 ºF to +149 ºF (-30 ºC to + 65 ºC)
10% – 90% Relative Humidity, no condensation
Shock, Vibration, Acceleration Units may be vertically mounted using shock mounts to a
bracket installed in a vehicle; operated horizontally while
located on a passenger seat in a vehicle, or operated in office
environments.
Vibration resistance (as tested)
Operating
Non-Operating
Acceleration 0.5G
Frequency 5 to 60HZ
Sweep Time 2 min/Cycle
Acceleration 1.5G RMS
Frequency 5 to 60HZ
Sweep Time 20 min/Cycle