Printer and Paper Specifications
B-3
Functional Specifications
Print method Impact dot matrix with a 0.23 mm (0.009 in), 24-wire head
Print direction Bidirectional logic-seeking
Character density Horizontal X vertical
Letter (10 cpi): 36 X 24 dots
Letter (12 cpi): 30 X 24 dots
Draft: 12 X 24 dots
Paper handling
Single Forms
Continuous forms
With the Paper Path Select Lever in the Single Sheet position,
single sheets or forms may be used. The printer automatically
senses that paper has been manually inserted. When paper is
detected, the printer will advance the form to the first print line.
With the Paper Path Lever set to the Continuous Form position,
continuous forms may be printed. Paper is loaded and
adjusted via keys. Forms may be advanced to tear off feature
by operator or by host. Continuous forms are parked while sin-
gle sheets are used.
Paper type 1-to 4-part side-glued or paper-stapled fanfolded continuous
forms or single page top-glued forms.
Paper size
Continuous
Cut sheets
Width: 102–216 mm (4–10.5 in)
Length: 102 mm (4 in) or greater
Width: 102–267 mm (4–10.5 in)
Length: 102 mm (4 in) or greater
Paper thickness Up to 0.35 mm (0.014 inch)
Paper length
By software
By control panel
Programmable in one line or inch increments
3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11 (Letter), 11 2/3 (A4), 12, 14, or 15
inches (Default is 11 inches.)
1 to 126 lines
Number of copies Up to 4, including the original
Command sets (emulations) Epson-EP2
IBM Proprinter XL24E (2390+)
Intermec 6820
To Next Page
Loading...
