Emulations User guide
150
<ESC>*MI>F Assign character set G2
<ESC>-<n> Underlining ON/OFF
<ESC>/<m> Select vertical tab channels
<ESC>. Printing raster graphics
<ESC>: Condensed printing 12 cpi ON
<ESC>:<0><n><m> Copy ROM character set
<ESC>< Unidirectional printing for 1 line
<ESC>= Set bit 8 = 0
<ESC>=<C1><C2>... Load font/character set
<ESC>> Set bit 8 = 1
<ESC>?<s><n> Reload a graphics mode
<ESC>@ Initialize printer
<ESC>[ MTPL start character for programming sequence
<ESC>[$A<n1><n2> Fast graphic print with 90 dpi
<ESC>[$B<n1><n2> Fast graphic print with 180 dpi
<ESC>[+0<u> Compmode = On
<ESC>[+1<u> Compmpde = Off
<ESC>[:y Right justification and centering OFF
<ESC>[$A<n1><n2> Fast graphic print 90 dpi vertical
<ESC>[$B<n1><n2> Fast graphic print 180 dpi vertical
<ESC>[=z Bold ON
<ESC>[>z Bold OFF
<ESC>[?1~ MTPL command set
<ESC>[?10~ Barcode interpretation OFF
<ESC>[?11~ Start barcode interpretation
<ESC>[?4~ MTPL + IBM Proprinter-24 command set
<ESC>[?50h Selecting character sets with 256 characters
<ESC>[?50l Selecting character sets with 94 characters
<ESC>[?51h Proportional fonts automatic NLQ and LQ
<ESC>[?51l Proportional fonts in draft mode possible (default)
<ESC>[?52h
Font selection (ESC[10...19m]) possible only for NLQ and LQ
<ESC>[?52l Font selection (ESC[10...19m]) Draft possible (default)
<ESC>[?53h Extended character set
<ESC>[?53l Standard character set
<ESC>[?6~ MTPL + EPSON LQ command set
<ESC>[?7h Line overrun = CR + LF
<ESC>[?7l
Line overrun = Truncating data outside of the printing area
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function
To Next Page
Loading...
