∙ 10 ∙
cleaning & maintenance
Always allow the appliance to cool completely before moving, cleaning, or
storing. Do not submerge appliance in water or any other liquids. Never use
abrasive cleaning agents to clean your appliance as this may damage the
Express Wafe Maker.
In order to keep your Express Wafe Maker in pristine working order,
thoroughly clean the appliance after each use. This will prevent the build-up of
food or oil.
• Unplug Express Wafe Maker and allow it to cool completely.
• Using a damp, soapy cloth, wipe down the Cooking Surface and Cover.
Thoroughly rinse the cloth and wipe again.
• Thoroughly dry Express Wafe Maker before storing.
• If food is burned onto the Cooking Surface, pour on a small amount of
cooking oil and let sit for 5 to 10 minutes. Scrub the Surface with a sponge or
soft bristled brush to dislodge food. Use a damp, soapy cloth to wipe down
the Cooking Surface. Thoroughly rinse the cloth and wipe again. If any food
remains, distribute another small amount of cooking oil and let sit for a few
hours, then scrub and wipe clean.
• Never use abrasive cleaning agents to clean your appliance as this may
damage the Express Wafe Maker and its non-stick Cooking Surface.