Data Aire dap4 - CO2 Setpoints

To Next Page

To Previous Page

Press the Enter key. The cursor will ﬂ ash on ﬁ rst input (month). Press the Up or Down key to

scroll through the two digit month designation. Select the month (1-12).

Press the Enter key. The cursor will ﬂ ash on the next input (day). Press the Up or Down key to

scroll through the day of the month designation. Select the day (1-31).

The entered month and day are the START DATE of the holiday.

Press the Enter key. The cursor will ﬂ ash on the next input (month). Press the Up or Down key to

scroll through the two digit month designation. Select the month (1-12).

Press the Enter key. The cursor will ﬂ ash on the next input (day). Press the Up or Down key to

scroll through the day of the month designation. Select the day (1-31).

The entered month and day are the STOP DATE of the holiday.

Press the Enter key. The cursor will ﬂ ash on the SETTING input. Press the Up or Down keys to

scroll through the choices – there are two: PRIMARY and SECONDARY.

Note: To clear an entry line, press the Enter key until it is over the start month input. Press the Up

or Down key until - - appears. Press the Enter key. All inputs for the line will be removed.

With the cursor in the title block,

Press the Up or Down key. The following screen will be displayed:

Press the Enter key. The cursor will ﬂ ash on ﬁ rst input (month). Press the Up or Down key to

scroll through the two digit month designation. Select the month (1-12).

Press the Enter key. The cursor will ﬂ ash on the next input (day). Press the Up or Down key to

scroll through the day of the month designation. Select the day (1-31).

Zone Holiday Schedule

Start Stop Setting

--/-- --/-- --------

Zone Spec Day Schedule

Day Date Setting

SD1: --/-- --------

SD2: --/-- --------

SD3: --/-- --------

SD4: --/-- --------

SD5: --/-- --------

SD6: --/-- --------

Other manuals for Data Aire dap4