Data Aire dara-4g2 - Optional Network Communication for Monitoring and Control

8•dara-4g
2
User Manual
Optional Network Communication card for Monitoring and Control
dara-4g
2
supports an optional network communication card that allows an interface with a BMS or
BAS system for system monitoring and control. dara-4g
2
supports one of the following network pro-
tocols: Modbus RTU. Modbus TCP/IP, BACnet MS/TP, BACnet IP, SNMP.
The following points are available:
For monitoring:
- Units’status(onoroff)
- Units’alarm(unitinalarmmode)
- Manual override alarm status
- Optional zone temperature reading
- Optional zone humidity reading
For Control:
- Change units status setting
- Zone temp setpoint
- Zone Temp deadband
- Changeover delay
- Changeover schedule