DataCard SP75 Plus - Page 15

Page 15 of 25
Datacard Group Confidential
• Print resolution: 300 dots-per-inch
• Electrical requirements: Dual voltage-auto sensing
− 100/120V, 50/60 Hz
− 220/240V, 50/60 Hz
• Communications: Bidirectional USB, Ethernet
• Plastic cards accepted:
- Size: 3.370 in. x 2.125 in. (85.6mm) x (53.98mm)
- Type: PVC with glossy laminate surface; other core materials with PVC
overlaminates are optional
• Resident memory: 16MB
• Climate Conditions
− 60 to 95 degrees F (15°C to 35°C)
− 20% to 80% non-condensing humidity
• Storage Conditions
− 5°F to 140°F (-15°C to 60°C)
− 10% to 90% - Humidity
• Datacard® Certified Supplies:
− Ribbon kits include: One print ribbon, one adhesive cleaning sleeve, and one
Isopropanol cleaning card
− Ribbon kits available:
o YMCK (three colors, black) – up to 500 images per roll
o YMCK-K (three colors, black front, black back) – up to 500 images per roll
o YMCKT-K(three colors, black front, topcoat, black back) – up to 375 images per
roll
o YMCKF-KT (three colors, black, florescent ultraviolet, black, topcoat) – up to
300 images per roll
o YMCKT-KT (three colors, black, topcoat, black, topcoat) – up to 300 images per
roll
o YMCKT (three colors, black and topcoat) – up to 250 or 500 images per roll
o ymcKT (three colors short panel, black and topcoat) – up to 650 images per roll
o KT (black with topcoat) – up to 1000 images per roll
o K (black) – at least 1500 images per roll
o Black HQ
o Additional colors available (red, dark blue, silver, white, scratch-off gray)
− Cleaning supplies available:
o Isopropanol Cleaning Card
o Adhesive Cleaning Sleeve
o Isopropanol Cleaning Pen
− Storage Conditions for Datacard® Certified Supplies:
o 32 to 77 degrees F (0C to 25C)
o 40% to 60% Humidity
o No direct exposure to sunlight
• Physical dimensions:
− Small Footprint 23.1” L x 9.92” W (586.74 mm L x 251.97 mm W)
− H = 18.82” to 23.52” (478.03 mm to 597.41 mm) depending on hopper options
• Weight:
− Less than 27 pounds without supplies
• Shade count: 256 shades