Need help?Do you have a question about the DataCard SP25 Plus and is the answer not in the manual?
General| Print Technology | Direct-to-card dye-sublimation/resin thermal transfer |
|---|---|
| Print Resolution | 300 dpi |
| Card Feeder | 100-card input hopper |
| Card Sizes | CR-80 (85.6 mm x 54 mm) |
| Connectivity | USB |
| Operating System Compatibility | Windows 7, 8, 10, Server 2008, 2012 |
| Print Capability | Single-sided |
Details the external features and layout of the SP Series printer.
Explains the internal components and their functions within the SP Series printer.
Lists and describes the various features and optional modules available for the SP Series printer.
Explains how to use the SmartDriver for formatting card data and printing.
Details the Open Card data format, its capabilities, and usage for printing.
Summarizes the requirements and features of both Open Card and SmartDriver data formats.
Outlines the necessary environmental, electrical, and physical conditions for printer installation.
Lists and describes the software utilities and network tools for printer setup.
Provides steps to prepare the printer, including loading supplies and powering on.
Explains methods for connecting the SP Series printer to a network using Ethernet or print servers.
Guides users through configuring network addressing modes like DHCP and Static IP for the printer.
Details how to set up the printer for card design based on the chosen data format (SmartDriver/Open Card).
Describes the printer's support for SNMP (Simple Network Management Protocol) features.
Provides instructions on how to clean the printer's internal rollers to maintain performance.
Illustrates the menu structure for navigating printer settings and diagnostics.
Explains how to view printer status information such as serial number and firmware revision.
Guides users on how to access and modify printer configuration settings.
Details the procedure for adjusting the brightness of the printer's LCD screen.
Instructs on selecting the appropriate data format (SmartDriver/Open Card) for the printer.
Covers setting the network address mode (DHCP or Static IP) for printer network configuration.
Provides steps for configuring static IP, subnet mask, and gateway addresses for network connectivity.
Explains how to adjust the K Power setting to control monochrome print darkness and intensity.
Lists available color print ribbons for the SP55 printer, including part numbers and image counts.
Lists available color print ribbons for the SP60 printer, including part numbers and image counts.
Describes monochrome and topcoat ribbon options and their part numbers.
Details available monochrome print ribbon colors and their corresponding part numbers.
Lists available cleaning supplies for the printer, including sleeves and cards.
Provides information on FCC regulations, Class A digital device compliance, and potential interference.
States that the digital apparatus does not exceed Class A limits for radio noise in Canada.
Outlines the manufacturer's liability regarding the product's use, operation, and repair.
Covers essential safety information, including environmental and human interface considerations.
To Next Page
