Why DataCard SD260 has a temporary communication problem?
USB extension cables can cause communication problems. The recommended USB cable is 6-ft (2 meters) long. Be sure to use a cable rated for USB 2.0 data transmission.
What to do if DataCard SD260 does not install or print when connected to a remote network via VPN?
If your DataCard Printer doesn't install or print while your PC is connected to a remote network using VPN Client software, you can either configure your VPN software to allow local network connections or disconnect the VPN Client software from the network.
Why is my DataCard Printer not installing when the USB cable is already connected?
When installing a DataCard Printer on a PC via USB for the first time, the installation must be initiated from the driver CD or the downloaded Card Printer Driver. Connect the USB cable only when prompted during the installation process, not before.
What to do if DataCard Printer does not install when the USB cable is connected?
If a previous installation attempt of your DataCard Printer was unsuccessful, the Device Manager might still have an entry for the printer. Before reinstalling, remove the printer entry from the Device Manager.
What to do if I get an error message that the USB is not detected on my DataCard SD260?
If you receive an error message stating that the USB is not detected, it means the USB installer timed out before a printer was detected. Remove the Card Printer Driver from the Device Manager before reinstalling the printer.
What to do if my DataCard SD260 Printer data cable is damaged?
Power off the printer. Replace the cable if you have a spare. Contact your service provider to order a new data cable.
What to do if DataCard Printer cable is loose (Network)?
Reconnect the data cable to the network port and the printer. Restart the printer.
Why is the Print Sample Card button grayed out on my DataCard SD260 Printer?
The Print Sample Card button in the Printer Properties is enabled when the printer and driver communicate normally. If the Print Sample Card is gray, check that the USER button on the front of the printer is steady green and that “Ready” is displayed on the LCD panel.
What to do if my DataCard Printer can't pick a card?
If your DataCard Printer can't pick a card, make sure the ?PICK? Latch is closed.
Why is the PC USB port not communicating with the DataCard SD260 Printer USB port?
Power management on the PC has shut down USB communication.
General| Windows operating systems supported | Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64 |
|---|---|
| Color | Yes |
| Print speed (color) | 200 card/h |
| Product color | Blue, Grey |
Weight and Dimensions| Depth | 391 mm |
|---|---|
| Width | 175 mm |
| Height | 224 mm |
Lists the minimum hardware and operating system specifications for the PC.
Outlines installation methods: Driver CD, Download, Printer Sharing, and Pooling.
Overview of procedures for installing the printer driver.
Step-by-step guide for installing the printer via USB using the installation CD.
Step-by-step guide for installing the printer via network using the installation CD.
Guides on setting up and using the printer over a network with shared access.
Overview of common printer messages and error conditions.
Lists common error messages and provides troubleshooting steps for each.
Step-by-step instructions for uninstalling the XPS Card Printer Driver.
Procedure to identify the source of printer malfunctions.
Common issues encountered during printer installation and their solutions.
Specific troubleshooting steps for USB printer connection problems.
Specific troubleshooting steps for network printer connection problems.
Troubleshooting issues related to printer driver detection and communication.
Troubleshooting steps for when no printing occurs on the card.
Solutions for resolving issues with extraneous data appearing on cards.
Troubleshooting steps for defects in color printing quality.
Solutions for issues resulting in faint or light card printing.
Solutions for issues resulting in overly dark card printing.
Troubleshooting steps for quality issues in monochrome printing.
Common problems and solutions for magnetic stripe encoding and reading.
To Next Page
