DataCard SD260

153
5. Load up to 200 cards in the hopper and close the cover. The printer is ready to
print cards.
Install the Lock Option
The lock option is a user-installed feature that does not require special tools to
install. The package contains a Kensington
®
Lock with keys, instructions, and a
metal security plate. The security plate is installed in the printer and is designed
to accommodate the T-bar of the Kensington lock.
1. Prepare the print
er by installing the
metal security plate and then follow the
instructions included in the packaging.
2. The security plate receptacle is located
on the underside of the printer towards
the back left-hand side.
3. Insert the security plate into the
receptacle with the open end toward
th
e printer.
4. Follow the instructions included with
the lock
to complete the installation.