DataCard SD260

146 Supplies and Parts
Cables used with the Printer
The printer uses a data cable and a power cable.
Data Cable
The data cable connects the printer to the network or PC sending cards. The data
cable can be:
• USB cable
• Network cable
USB Cable
Use a USB data cable, 6 feet (2 meters) long, to connect the
printer to th
e PC. Be sure to use a cable rated for USB 2.0
data transmission.
Network Cable
Use a standard network cable, sometimes called a Category 5 or Cat 5 cable, to
connect the printer to a netw
ork port.
Smart Card Cable
Use a USB cable up to a maximum of 6 feet (2 meters) long to connect t
he smart
card port to the PC.
Power Cable
The power cable connects to facility power and the printer power supply. Be sure
to use a cable that grounds to the facility power source.
The printer can use one of the following power cords:
• USA power cable
• European power cable
• Australian power cable
• U
nited Kingdom power cable
• Danish power cable
• Indian power cable
• Israeli power cable
• Italian power cable
• Swiss power cable