DataCard SD260

149
Chapter 12: How-To Topics
• “Install a Large Output Hopper”
• “Install the 200-Card Input Hopper”
• “Install the Lock Option”
• “Adjust the Colors Printed”
• “View Card Counts using the Driver”
• “View Card Counts from the Printer LCD Menu”
• “Change a Card Design”
• “Run a Cleaning Card”
• “Clean the Printhead”
• “Set the Driver Network Port Value”
• “Encode Magnetic Stripe without Printing”
• “Change the LCD Backlight”
• “Get the Printer Network IP Address”
• “Get the Printer USB IP Address”
• “Load Cards”
• “Load Ribbon”
• “Open Printing Preferences”
• “Open the Printer Manager”
• “Open Printer Properties”
• “Print Driver Sample Cards”
• “Print a Printer Test Card”
• “Print on Both Sides of the Card”