DataCard SD260

203
Liability Statement
This product has been built to the high standards of ScreenCheck. Please note and
heed the WARNING and CAUTION labels that have been placed on the
equipment for your safety. Please do not attempt to operate or repair this
equipment without adequate training. Any use, operation or repair in
contravention of this document is at your own risk. By acceptance of this system
you hereby assume all liability consequent to your use or misuse of this
equipment. ScreenCheck assumes no liability for incidental, special, or
consequential damage of any kind. Equipment specifications, applications and
options are subject to change at the sole discretion of ScreenCheck without notice.
Safety
All Datacard Group brand products are built to strict safety and reliability
specifications in accordance with UL60950 and Canadian requirements, and the
Low Voltage Directive 73/23/EEC. Therefore, safety issues pertaining to
operation and repair of Datacard Group brand equipment are primarily
environmental and human interface.
The following basic safety tips are given to ensure safe installation, operation and
maint
enance of Datacard Group brand equipment and are not to be considered as
comprehensive on all matters of safety.
Safe environment
Connect equipment to a grounded power source. Do not defeat or bypass the
ground lead.
Place the equipment on a stable surface (table) and ensure
floors in the work area
are dry and non-slip.
Know the location of equipment branch circu
it interr
upters or circuit breakers
and how to turn them on and off in case of emergency.
Know the location of fire extinguishers
and how to use them. ABC type
extinguishers may be used on electrical fires.
Know local procedures for first aid and emergency assistance at th
e customer
facility.
Use adequate lighting at the equipment location.
Maintain the recommended te
mperature and
humidity range in the equipment
area.