Need help?Do you have a question about the DataCard SR200 and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Input Hopper Capacity | 100 cards |
| Output Hopper Capacity | 100 cards |
| Power Requirements | 100-240V AC, 50/60 Hz |
| Print Technology | Dye sublimation |
| Card Size | CR-80 (85.6 mm x 54 mm) |
| Card Thickness | 30 mil to 40 mil |
| Connectivity | USB |
| Operating System Support | Windows 7, Windows 8, Windows 10 |
Provides detailed instructions for operating printers and laminators.
Lists other manuals for installation and software.
Explains retransfer printing technology and SR200/SR300 capabilities.
Describes LM200/LM300 laminating modules and their functions.
Identifies external components on the printer's front, side, and back.
Identifies key internal components of the printer.
Explains LCD panels, indicators, and buttons for operation.
Identifies external components on the front, rear, and sides of the laminator.
Identifies internal components of the laminator.
Pre-operation checks and setup advice.
Step-by-step guides for loading consumables like cards and film.
Procedures for connecting, powering on, and initializing devices.
Guides for printing cards using software applications.
Configuring printer behavior via driver properties and preferences.
Using Status Monitor to view and change printer/laminator settings.
Navigating and changing settings via the printer's LCD panel.
Detailed steps for cleaning printer and laminator components.
Procedures for preparing devices for movement or shipping.
Steps to clear jams and resolve printer errors.
Steps to clear jams and resolve laminator errors.
Lists and explains printer and laminator error messages.
Information on encoding magnetic stripe data onto cards.
Details on ribbons, film, cards, and cleaning supplies.
Specifications and guidelines for card stock.
List of recommended cleaning supplies and part numbers.
Detailed list of error codes and solutions from the Status Monitor.
Environmental, site, and technical specifications for devices.
To Next Page
