DataCard SR200 User Manual

78 Maintaining Your Printer and Laminator
Cleaning the Laminator Cartridge
Laminatorcartridgescancollectdebrisanddustduringlaminationandsupplyloading.Cleanthe
cartridge(s)every1,000cards.
1. Openthelaminatordoor.
2. Pressthecartridgereleasebuttonandpulloutthefilmcartridge.
3. Removethelaminatefilmfromthefilmcartridge.
4. CleanthefourmetalguideswithaDatacard®printheadcleaning
swab(providedinthe
CleaningKit.Referto“CleaningSupplies”onpage 109).
5. Replacethesupplyandtake‐upspoolsonthecartridge.Referto“LoadingTop‐SideLaminate
Film”onpage 17.
6. Replacetheloadedlaminatorcartridgeinthelaminatoruntilitclicksinposition.
7. Closethelaminatordoor.
Cleaning the Fan Filter
Thelaminatorfanfilterkeepsairborneparticlesfromenteringthe
unit.Cleanthefilterregularlyandreplaceitwhenthefoambegins
todeteriora te.
1. Removethefilterfromthebackofthelaminatorbypullingthe
filtercoveroff.
2. Cleanthefiltercarefullyusingavacuumcleaner.Holdthefoam
filter
inplacetopreventitfrombeingdrawnintothevacuum.
3. Reinstallthefilter.

DataCard SR200 Specifications

General

Brand	DataCard
Model	SR200
Category	Printer
Language	English