What to do if DataCard SD360 does not install or print when connected to a remote network via VPN?
If your DataCard Printer doesn't install or print while your PC is connected to a remote network using VPN Client software, you can either configure your VPN software to allow local network connections or disconnect the VPN Client software from the network.
Why is my DataCard Printer not installing when the USB cable is already connected?
When installing a DataCard Printer on a PC via USB for the first time, the installation must be initiated from the driver CD or the downloaded Card Printer Driver. Connect the USB cable only when prompted during the installation process, not before.
What to do if DataCard SD360 Printer does not install when the USB cable is connected?
If a previous installation attempt of your DataCard Printer was unsuccessful, the Device Manager might still have an entry for the printer. Before reinstalling, remove the printer entry from the Device Manager.
What to do if I get an error message that the USB is not detected on my DataCard SD360 Printer?
If you receive an error message stating that the USB is not detected, it means the USB installer timed out before a printer was detected. Remove the Card Printer Driver from the Device Manager before reinstalling the printer.
Why does my DataCard SD360 have a temporary communication problem?
Temporary communication problems with your DataCard Printer may be due to several factors. Check the following: USB extension cables can cause communication problems. The recommended USB cable is 6-ft. (2 meters) long and rated for USB 2.0 data transmission. If you are using a USB hub, a self-powered hub is recommended.
What to do if the cable is loose on my DataCard SD360?
If the cable is loose on your DataCard Printer, reconnect the USB cable to the ports on the PC and the printer. Power the printer off, and then back on. If the PC and printer still do not communicate, restart the PC.
What to do if the data cable of my DataCard Printer is damaged or frayed?
If the data cable is damaged or frayed, power off the DataCard printer. If you have a spare cable, replace the damaged one. Otherwise, contact your service provider to order a new data cable.
What to do if the network cable is loose on my DataCard SD360 Printer?
If the network cable is loose, reconnect the data cable to the network port and the printer, ensuring it's securely snapped in. Then, restart the printer.
Why is the PC USB port not communicating with the DataCard SD360 USB port?
Power management on the PC has shut down USB communication.
Why is the 'Print Sample Card' button not available for my DataCard Printer?
The 'Print Sample Card' button in Printer Properties is enabled when the printer and Card Printer Driver communicate normally.
Lists compatible Windows OS for the driver.
Lists printers compatible with the driver.
Explains driver functions and how it communicates with the printer.
Covers pre-installation steps, requirements, and overview of the installation process.
Guides through starting and performing the driver installation via USB or network.
Details updating the driver and managing client PCs in shared environments.
Covers connecting multiple printers, secure printing, sharing, and pooling.
Introduces the window for managing driver settings.
Covers General, Sharing, and Ports tabs for basic setup.
Details Advanced, Color, and Security tabs for performance and access.
Covers Status, Card Counts, and Supplies tabs for monitoring.
Shows driver version and copyright details via the About tab.
Provides methods to remove the driver from the system.
Explains changing card design elements and best practices.
Covers Layout, Advanced options, Disable Printing, and other print settings.
Details monochrome printing, rotation, retransfer layers, and UV printing.
Covers input hoppers, impress cards, rewritable cards, and print area functions.
Explains using escapes for print blocking, magnetic stripes, and other printer functions.
Addresses common problems and solutions for USB printer installations.
Covers issues and solutions for installing the printer over a network.
Guides on configuring the host PC for printer sharing.
Details installing the driver on client PCs for shared access.
Guides on configuring the host PC for sharing on Windows Server.
Details installing the driver on client PCs for Server sharing.
Explains how braille characters are expressed using dot sequences and ASCII conversion.
General| Card size | 85.6 x 53.98 mm |
|---|---|
| Card types | Magnetic stripe (ISO 7811), PVC |
| Card feeder | Yes |
| Print technology | Dye-sublimation |
| Maximum resolution | 300 x 300 DPI |
| Print speed (color) | 200 card/h |
| Print speed (monochrome) | 830 card/h |
| Duplex print speed (color) | 155 card/h |
| Display | LCD |
| Lamination | No |
| Certification | cULus, FCC, I.C, CE, Ctick, VCCI, RoHS, WEEE, ENERGY STAR, CCC |
| Product color | Black, Blue |
| Internal memory | 128 MB |
| Built-in barcodes | 1D, 2D |
| Cable lock slot type | Kensington |
| Total input capacity | 100 sheets |
| Compatible operating systems | Windows Server 2003/Server 2008 |
| Windows operating systems supported | Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
| Storage temperature (T-T) | -15 - 60 °C |
| Operating temperature (T-T) | 15 - 35 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Interface | USB & Ethernet |
Weight and Dimensions| Weight | 5400 g |
|---|---|
| Dimensions (WxDxH) | 175 x 539 x 224 mm |
To Next Page
