DataCard SD260 User Manual

134 Troubleshooting
The printing is too light
Problem Probable Cause Solution
Photos look faded. The image capture
system needs
adjustment.
Color settings might not be optim
al.
See information for the image capture
system.
Chan
ge color settings. See “Adjust the
Colors Printed”.
The printing is very light. The ribbon is loaded
incor
rectly.
Load the print ribbon correctly. Se
e “Load
Ribbon”.
The card was
pre
viousl
y printed and
has topcoat on it.
Print only new cards. See “Cards” for
specifications.
The printhead is not
installed correctly.
Contact
your service provider for
instructions on installing the printhead
correctly.
The printing in too dark
Problem Probable Cause Solution
The card shows wrinkles
in da
rkly colored areas.
The card includes very
dark areas.
Change the design to use smaller areas of
dark color.
The printhead is not
al
igned c
orrectly.
Contact your service provider.
All color printing is
darker than
intended.
Color adjustment is too
dark. Using different
card stock changes
the appearance of
printed cards.
Change the color adjustment settings.

DataCard SD260 Specifications

General

Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Color	Yes
Print speed (color)	200 card/h
Product color	Blue, Grey

Weight and Dimensions

Depth	391 mm
Width	175 mm
Height	224 mm