75
• “115: Wait for print temperature”
• “116: Magstripe not available”
• “117: Reader not available”
• “118: Print ribbon type problem”
• “119: Print ribbon not supported”
• “120: User paused the printer”
• “121: Print ribbon ID problem”
• “122: Magnetic stripe format problem”
• “123: Insert new card then continue”
• “124: Insert same card then continue”
• “500: The printer is not available. The card cannot print.”
• “501: The printer connection was lost. P
rinting the ca
rd is canceled.”
• “502: The card data is missing or is not usable. The card cannot print.”
• “503: The magnetic stripe data is missing. The card cannot print.”
• “505: Bonjour is not installed. Cannot connect to the
printer.”
• “506: A card is currently processing.”
100: Request not supported
To print the card:
1. Change the data to match printer feat
ures and settings.
2. Send the new card to print again.
HINTS & TIPS
• The card, if it started to print,
should be discarded.
• Make sure you have chosen the correct printer in the
application. Ask your
Manager for assistance if needed.
101: Job could not complete
The card took too much time. Press the USER button on the
printer to clear the error.
To print the card again:
1. Make su
re all
data for the card is available.
To Next Page
Loading...
