DataCard SD260

141
• Continuous black (K ribbon), up to 1500 images per roll
• Continuous dark blue, up to 1500 images per roll
• Continuous gold, up to 1500 images per roll
• Continuous gold metallic, up to 1500 images per roll
• Continuous red, up to 1500 images
per roll
• Continuous white, up
to 1500 images per roll
• Continuous green, up to 1500 images per roll
• Continuous silver, up to 1500 images per roll
• Continuous silver metalli
c, up to 1500 im
ages per roll
• Continuous scratch-off, up to 1500 images per roll
Print Ribbon Storage Guidelines
• Store print ribbon in the original package until you load it in the printer.
• Keep the original packaging closed.
• The print ribbon maintains its quality for about one year. For optimum card
qu
ality, purchase and store quantities that can be used within one year.
• The print ribbon and card stock might require secure storage and tracking.
Follow
your policy for storing and tracking the supplies used to make cards.
• Choose a location away from direct sunligh
t, with a temperature between 32°
F and 77° F (0° C and 25° C). A humidity range from 40% to 60% non-
condensing is recommended.
• Supply rolls should be at room
temperature when installed in the printer. If
supplies are stored in an environment that is cooler than the printer
environment, allow supplies to reach room temperature before using.
• If the printer will not be used for an extended pe
riod, remove supplies from
the printer and store them with new supplies.
Cards
This section describes the cards to use with the printer. For best results, use high-
quality cards that meet the specifications and recommendations described in this
section.