82 Using the Printer
115: Wait for print temperature
The printer is not at the correct temperature to print the card.
Printing the card will resume on its own.
HINTS & TIPS
• The card, if it started to print, should be discarded.
• Make sure you have chosen the corre
c
t printer in the application. Ask the
Manager for assistance if needed.
116: Magstripe not available
Look at the “config” area of the label inside of the printer cover. Does the label
show “M” or “J”?
1. If yes, the printer has a magstripe option
that is not wor
king. Request service.
2. If no, the printer does not have a
magstripe option.
3. To print the card without magstripe,
remove magstripe data from the
card and
send it again.
HINTS & TIPS
To remove magstripe data, you might need
to:
• Uncheck a b
ox in the applic
ation.
• Change the font from “Mag Track X XPS C
ard Printer” to a printable font
such as Arial, Verdana, or Calibri.
117: Reader not available
The printer does not have a reader option.
1. To print the card without using
a reader option, remove the reader request
from the card and send it again.
HINTS & TIPS
• To remove
the reader request
, you might need to uncheck a box in the
application.
To Next Page
Loading...
