Page 82
SY-01332 Hardware Error
General printer fault.
Possible Cause 1: The printhead cable is not attached to the printhead
cartridge.
Solution 1: Power off the printer. Make sure the printhead cable is fully
seated in the printhead cartridge. Close the printer and power it on.
Possible Cause 2: The printer identified a problem while it was running a
diagnostic test.
Solution 2: Power the printer off and on.
If you cannot fix the problem, contact your service provider for assistance.
Related Topics:
See SP Series Info Central for details about connecting the printhead if
needed.
To Next Page
Loading...
Need help?
General
