Page 73
SY-01310 Flash Error
EEPROM flash data error.
Possible Cause 1: A transmission problem occurred.
Solution 1: Send the file or data again. You can repeat this action several
times.
Possible Cause 2: Data being sent to the printer is corrupted or incorrect.
Solution 2: Obtain the correct update file (or a new update file) and repeat
the process. Be sure to select the correct update file if you are using
SmartDriver Printer Diagnostics or the file2prn utility.
If you cannot fix the problem, contact your service provider for assistance.
To Next Page
Loading...
Need help?
General
