Page 49
View Card Counts
1 With “Status Menu” displayed on line 1, press the Up or Down Arrow key to display
“Card Counters” on line 2
2 Press the Enter key. “Card Count” appears on line 2.
3 Press the Enter key to view the total number of cards printed on this printer.
4 Press the Enter key to return to Card Counters. “Cycle Count” appears on line 2.
5 Press the Enter key to view the cycle count or press the Up or Down Arrow key to
display “Exit” on line 2.
6 To print cards, press the Enter key repeatedly to return to the “Printer Ready”
display.
A cycle is one pass of the printhead. With monochrome (K) ribbon, one cycle prints the
front of the card. A second cycle might print the back of the card. With full-color YMCKT
ribbon, each color panel uses one print cycle; the front of the card uses five print cycles.
To Next Page
Loading...
