Page 54
Set LCD Backlighting
1 With “Configuration” displayed on line 1, press the Up or Down Arrow key if needed
to display “LCD Backlight” on line 2.
2 Press the Enter key to display the current value.
3 Press the Up or Down Arrow key to change the backlighting. The display changes
to show the effect of the new value.
4 When the backlighting reaches the level you want, press the Enter key. The display
remains at the new backlighting level and you return to the Configuration menu.
5 Press the Up or Down Arrow key if needed to scroll to “Exit” on line 2.
6 To print cards, press the Enter key repeatedly to return to the “Printer Ready”
display.
To Next Page
Loading...
