Page 50
View the Data Format
1 With “Status Menu” displayed on line 1, press the Up or Down Arrow key to display
“Network” on line 2.
2 Press the Enter key. “Address Mode” appears on line 2.
3 Press the Up or Down Arrow key to display “Data Format” on line 2.
4 Press the Enter key. The data format appears on line 2. Possible values are
SmartDriver, Open Card, and Reserved.
5 Press the Enter key to return to the Network Status menu.
6 Press the Up or Down Arrow key to display “Exit” on line 2.
7 To print cards, press the Enter key repeatedly to return to the “Printer Ready”
display.
To Next Page
Loading...
Need help?
General
