Page 72
SY-01306 Data Error
The setting value you selected is not valid.
Possible Cause 1: The value sent to the printer does not apply to the printer
attached.
Solution 1: Use approved programs, such as the printer’s Properties or
Printing Preferences dialog box, to send values to the printer.
Possible Cause 2: You are using SmartDriver Printer Diagnostics, you have
attached another printer, and have not selected the new printer in
Diagnostics.
Solution 2: Wait while the driver updates all printer information. Choose the
new printer in Diagnostics. Wait a moment while Diagnostics updates to
reflect the new printer.
To Next Page
Loading...
