Page 1
About the printer
This guide applies to SP Series printers with the Built-in Ethernet feature, and includes the SP55 card printer with
Built in Ethernet, the SP55 card printer with Built-In Ethernet and Open Card, and the SP60 card printer.
The outside of the printer
Duplex Module: Optional module at the back of the
printer that turns the card to print the other side.
Printer Cover.
Latch: Lift the latch to open the printer cover.
Input Hopper: Open the cover to load blank cards.
LCD Panel: Shows the printer status and any messages.
Use the LCD panel to change network settings for
printers with the Built-in Ethernet feature.
Ready Key: Push to pause or resume the
printer.
The Status Light helps you understand printer operation.
See
“The LCD panel” on page 10 for details.
Output Hopper: Remove completed cards.
To Next Page
Loading...
