Page 51
View the Network Address Mode, IP Addresses, and MAC Address
1 With “Status Menu” displayed on line 1, press the Up or Down Arrow key to display
“Network” on line 2.
2 Press the Enter key. “Address Mode” appears on line 2. Press the Enter key to
view the address mode. The possible values are DHCP or Static IP.
3 Press the Enter key to return to the Status menu. “Data Format” is displayed on line
2.
4 Press the Up or Down Arrow key to display “IP Address” on line 2.
5 Press the Enter key to display the IP address. If the address mode is DHCP and
the printer is not connected to an active DHCP network, the IP address is blank.
6 Press the Enter key to return to the Status menu. “Subnet Mask” is displayed on
line 2.
To Next Page
Loading...
