The next dropdown is where you will also choose whether or not to read your room
light to help set the brightness of your display properly based on the level of lighting
in your room. Once you have made your selections click next to move onto the next
screen. The final dropdown is the Grey Balance Calibration with Better, Faster
(recommended), and off. Better will do an iterative grey Balance which, though
taking longer, will give a more precise calibration. Choosing faster will do the
minimal Grey Balance required to get a calibration. Off, only use this when
calibrating a DLP front projector.
Once you have made your settings, click “next” to start the calibration process.
To Next Page
Loading...
Need help?
General
