To Next PageTo Next Page
Need help?Do you have a question about the Datacolor Spyder5 Pro and is the answer not in the manual?
General| Device Type | Colorimeter |
|---|---|
| Supported Display Types | LCD, LED, OLED |
| Ambient Light Monitoring | Yes |
| Measurement Range | 0.1 to 1000 cd/m² |
| Connection | USB |
| Compatibility | Windows, Mac |
| Color Standards | sRGB, Adobe RGB, DCI-P3 |
| Software | Spyder5 software |
| Supported Resolutions | All |
The initial screen guiding users through the calibration process with key checks.
Allows selection of the specific display to calibrate in a multi-monitor setup.
User selects whether the display is a Desktop or Laptop for optimal calibration.
Identify the manufacturer and model of the display for software optimization.
Instructions on how to place the Spyder5 unit on the display for measurement.
Name and save the generated monitor profile after calibration.
Compare calibrated and uncalibrated images to preview the new display profile.
The initial screen guiding users through the calibration process with key checks.
Allows selection of the specific display to calibrate in a multi-monitor setup.
User selects whether the display is a Desktop or Laptop for optimal calibration.
Specify monitor controls like Brightness and Kelvin presets for calibration.
Identify the manufacturer and model of the display for software optimization.
Configure target values like Gamma, White Point, and Brightness for calibration.
Reads ambient room light to help set optimal display brightness.
Reviews room light reading and recommends target settings.
Adjust display brightness during calibration based on recommended levels.
Instructions on how to place the Spyder5 unit on the display for measurement.
Name and save the generated monitor profile after calibration.
Perform a recalibration to save time compared to a full calibration.
Quickly checks display calibration status and determines if recalibration is needed.
Compare calibrated and uncalibrated images to preview the new display profile.
View display's gamut and compare it to industry standards like sRGB.
Provides quick access to various software features via a dropdown menu.
Perform tests to analyze display strengths, weaknesses, and performance.
The initial screen guiding users through the calibration process with key checks.
Choose between Step-by-step Assistant, StudioMatch, or Expert Console calibration modes.
Guides users through each step of the calibration process.
Configure custom targets, room light, and grey balance for advanced calibration.
Match multiple displays for a consistent picture across the workstation.
Reads ambient room light to help set optimal display brightness for matching.
Set target brightness, gamma, and white point for matching displays.
Provides full control over all calibration settings for expert users.
Adjust display brightness during calibration based on recommended levels.
Instructions on how to place the Spyder5 unit on the display for measurement.
Name and save the generated monitor profile after calibration.
Perform a recalibration to save time compared to a full calibration.
Quickly checks display calibration status and determines if recalibration is needed.
Compare calibrated and uncalibrated images to preview the new display profile.
Adjust settings to match monitors with different backlight technologies.
View display's gamut and compare it to industry standards like sRGB.
Provides quick access to various software features via a dropdown menu.
Perform tests to analyze display strengths, weaknesses, and performance.
