Measuring Room Light
If you have selected “Room Light On-Recommended” on a desktop machine, or
“Room Light Off-Recommended” on a laptop, the software will now want to take a
reading of your room light. Place the Spyder on your desk and click the next button;
a reading of your room light will be taken. Please be sure that no direct light is
falling on your display or the Spyder at this time.
After the reading is done the software will tell you what the room light
measurement is, it can be:
Moderately Low, Medium, or High
There will be recommendations on the screen based on which reading you have
achieved. We do not recommend calibrating in High or Very High room lighting.
To Next Page
Loading...