DPR-145 User Manual V-3.0 (14.09.2016)
-2-
• Electrical equipment should be installed only by qualified
specialist. No responsibility is assumed by the manufacturer or
any of its subsidiaries for any consequences resulting from the
non-compliance to these instructions.
• Check the unit for cracks and damages due to transportation. Do
not install damaged equipment.
• Do not open the unit. There is no serviceable parts inside.
Warranty voids if the unit is open.
• Fuse must be connected to the power supply input.
• Fuses must be of fast type with a maximum rating of 6A.
• Disconnect all power before working on equipment.
• When the unit is connected to the network do not touch
terminals.
• Any electrical parameter applied to the device must be in the
range specified in the user manual.
• Do not try to clean the device with solvent or the like. Only clean
with a dry cloth.
• Verify correct terminal connections before applying power.
• Only for front panel mounting.
To Next Page
Loading...
Need help?
General
