Datalogic Falcon X3 Quick Reference Guide

WARNIN
G
the terminal, but use the Wireless
Communications applet (see par. Error!
Reference source not found.).
4 CONNECTIONS
4.1 USB CONNECTION
You can use any standard mini USB cable to directly connect the Datalogic FALCON™ to a host
computer to transfer data through the USB interface.
Key:
A) Host Computer C) Datalogic FALCON™
B) Standard Mini USB
cable
NOTE
Connection through the cable is compliant to
2.0 USB standard.
The Single Cradle can be connected to the Host by any standard mini USB cable to transfer data
through the USB interface.
Key:
A) Host Computer C) Single Cradle
B) Standard Mini USB
cable
D) *Power Supply (only
necessary for battery
charging)
A
B
C
B
D
C
A

Datalogic Falcon X3 Specifications

General

RAM	256 MB
Flash Memory	1 GB
IP Rating	IP65
Operating System	Windows Embedded Handheld 6.5
Expansion Slot	MicroSD
Drop Resistance	1.8 m / 6.0 ft drops to concrete
Humidity	5 to 95% (non-condensing)
Supported Symbologies	PDF417, Data Matrix, QR Code
Operating Temperature	-10°C to 50°C (14°F to 122°F)