Name: Datalogic Falcon X3
Brand: Datalogic
Rating: 5 (1 reviews)

To Next Page

To Previous Page

b. Shift the cardholder to the right and then pull it up; insert the Micro SD card with the

written part upward.

c. Lock the card into place by pushing the cardholder down and then shifting it to the left;

pull the locking plate down.

6. Replace battery.

To remove the Micro SD card, follow the steps above to access the SD area, and remove it from its

slot.

CAUTION

Follow proper ESD precautions to avoid damaging the SD. Proper ESD precautions

include, but are not limited to, working on an ESD mat and ensuring that the

operator is properly grounded.

Do not force the card. If you feel resistance, remove the card, check the orientation,

and reinsert it.

Do not use the Micro SD card slot for any other accessories.

Other manuals for Datalogic Falcon X3

Questions and Answers:

Need help?

Do you have a question about the Datalogic Falcon X3 and is the answer not in the manual?

General