Datalogic Falcon X3 Quick Reference Guide

4.
Shift the cardholder to the left and then pull it up; insert the SIM Card with its contacts downward
and its round corner at the bottom:
5. Lock the card into place by pushing the cardholder down and then shifting it to the right.
6.
Pull the locking plate down.
7. Close the battery cover properly, by pressing the latch release button and pulling the latch down.
CAUTION
Follow proper ESD precautions to avoid damaging the SIM card. Proper ESD
precautions include, but are not limited to, working on an ESD mat and ensuring that
the operator is properly grounded.
Do not force the card. If you feel resistance, remove the card, check the orientation,
and reinsert it.
Do not use the SIM card slot for any other accessories.
The SIM Card option is not available in
802.11b/g radio and batch models.

Datalogic Falcon X3 Specifications

General

RAM	256 MB
Flash Memory	1 GB
IP Rating	IP65
Operating System	Windows Embedded Handheld 6.5
Expansion Slot	MicroSD
Drop Resistance	1.8 m / 6.0 ft drops to concrete
Humidity	5 to 95% (non-condensing)
Supported Symbologies	PDF417, Data Matrix, QR Code
Operating Temperature	-10°C to 50°C (14°F to 122°F)