Need help?Do you have a question about the Datalogic Gryphon D130 and is the answer not in the manual?
General| Type | Handheld Barcode Reader |
|---|---|
| Scanning Technology | Laser |
| Connectivity | USB, RS-232, Keyboard Wedge |
| Weight | 150 g |
| Scan Rate | 100 scans/sec |
| Decode Capability | 1D barcodes |
| Reading Distance | 0 to 30 cm |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -20 to 70 °C |
| Resolution | 0.1 mm |
| Supported Barcodes | UPC/EAN, Code 39, Code 128, Interleaved 2 of 5 |
| Humidity | 5 to 95% (non-condensing) |
| Drop Specification | 1.5 m |
| Current Consumption | 100 mA (typical) |
| Light Source | 650 nm Laser |
Explains automatic reading, beam centering, optimal angles, and success confirmation signals.
Details the process and requirements for the first-time connection and setup of the USB interface.
Details the step-by-step process for the initial connection and setup of the USB interface.
Outlines the procedure for subsequent connections after the initial USB setup.
Configures decoder parameters like ink spread, overflow, and decoding safety.
Lists barcode symbologies that are enabled or disabled for reading.
Details power, consumption, scan speed, sensor type, and light source specifications.
To Next Page