Need help?Do you have a question about the Datalogic Gryphon D200 and is the answer not in the manual?
General| Type | Handheld Barcode Reader |
|---|---|
| Corded | Yes |
| Scan Engine | 2D Area Imager |
| Connectivity | USB, RS-232, Keyboard Wedge |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20 to 70 °C / -4 to 158 °F |
| Light Source | LED |
| Decode Capability | 1D and 2D barcodes |
| Interfaces Supported | USB, RS-232, Keyboard Wedge |
| Ambient Light | Up to 100, 000 lux |
| Drop Resistance | 1.5 m |
| Technology | 2D Area Imaging |
| Humidity | 5 to 95% (Non-Condensing) |
| Drop Specification | Withstands repeated drops from 1.5 m / 5.0 ft onto a concrete surface |
| Power Supply | 5V DC via USB or external power supply |
| Supported Barcodes | 1D: UPC/EAN, Code 39, Code 128, etc. 2D: QR Code, Data Matrix, PDF417, etc. |
Steps to configure the interface required by the user's application.
Barcodes for restoring defaults and selecting specific RS232 interface modes.
Steps to restore defaults and select WEDGE interface, plus corresponding barcodes.
Selecting interface for IBM terminals using Key Transmission and Keyboard Type codes.
Codes to set keyboard nationality for the Wedge interface.
Steps to restore default settings and select the PEN interface.
Barcodes for restoring defaults and selecting PEN interface modes.
Default configurations for various RS232 interfaces.
Default configuration for the Wedge interface.
Visual representations of test codes for various symbologies.
Details of the 5-year warranty against defects and exclusions.
FCC rules regarding interference and operation of the device.
To Next Page