Datalogic Hand-Held Devices II - CODE SELECTION (continued) Configuration Strings

HHD II
138
CODE SELECTION (continued)
DESCRIPTION STRING
enable ISBN AP1
enable ISSN AP2
enable ISBN and ISSN AP3
ISBN Conversion codes
disable ISBN and ISSN AP0
Code 39 disable Code 39 family AB0
Standard no check digit control AB11
check digit control and transmission AB12
check digit control without transmission AB13
Full ASCII no check digit control AB21
check digit control and transmission AB22
check digit control without transmission AB23
CIP 39 AB3
Code 32 AB4
code length AB* xxxx
2/5 disable Code 2/5 family AC0
Interleaved 2/5 no check digit control AC11 xxxx
check digit control and transmission AC12 xxxx
check digit control without transmission AC13 xxxx
Normal 2/5 5 bars no check digit control AC21 xxxx
check digit control and transmission AC22 xxxx
check digit control without transmission AC23 xxxx
Industrial 2/5 (IATA) no check digit control AC31 xxxx
check digit control and transmission AC32 xxxx
check digit control without transmission AC33 xxxx
Matrix 2/5 3 bars no check digit control AC41 xxxx
check digit control and transmission AC42 xxxx
check digit control without transmission AC43 xxxx
CIP/HR AC5
xxxx = ASCII numbers that define the code length where:
• First 2 digits = minimum acceptable code length.
• Second 2 digits = maximum acceptable code length.
The minimum code length must always be less than or equal to the maximum. The maximum
code lengths are 99 characters.
Examples:
0132 = variable length from 1 to 32 digits in the code.
1010 = 10 digit code length only.