Enter Configuration Exit and Save Configuration
READING PARAMETERS
63
S
AFETY
T
IME
safety time
ÌBE&Î
Limits same
code consecutive reading.
Read 2 numbers in the range 00-99:
00 = no same code consecutive reading until reader is
removed (no decoding) for at least 400 ms.
01-99 = timeout from .1 to 9.9 seconds before a consecutive read
on same code.
safety time = 0.5 sec
See par. 4.6.5 for details.
B
EEPER
I
NTENSITY
beeper off *
ÌBG0ZÎ
low intensity
medium intensity
ÌBG1]Î
ÌBG2`Î
high intensity
ÌBG3cÎ
* This sets the beeper OFF for data entry, while for all other beeper signals it has the
meaning “very low intensity”. The Beeper Intensity parameter is effective for all operating
conditions described in par. 1.1.
To Next Page
Loading...
Need help?
General
