Datalogic Magellan 83 Quick Reference Guide

4 Magellan™ 8300/8400
Cleaning
Exterior surfaces and scan windows exposed to spills, smudges or debris
accumulation require periodic cleaning to assure best performance
during scanning and weighing operations. Use a clean, lint-free cloth or
paper towel dampened with a nonabrasive, mild, water-based window
cleaner to wipe away stains, smudges, fingerprints, spills, etc. from the
scan window and exterior surfaces (
Figure 4a).
Figure 4. Cleaning the Scanner
Daily, clean the debris chutes between the platter and the outer housing
(
Figure 4b). Most items can be cleared from the debris chutes by carefully
running a thin, stiff object like a credit card along all sides of the weighing
surface. If necessary, remove the platter (
Figure 4c) to clean the debris
chutes and drip rail.
CAUTION
DO NOT use abrasive cleaning agents or abrasive pads to clean this
product. Harsh chemicals, disinfectants, and cleansers can cause
damage which will adversely affect scanning and weighing perfor-
mance.
(Models vary)
ab
c
CAUTION
DO NOT spray
cleaners directly
on the scanner!

Datalogic Magellan 83 Specifications

General

Brand	Datalogic
Model	Magellan 83
Category	Barcode Reader
Language	English