Need help?Do you have a question about the Datalogic Magellan 800i and is the answer not in the manual?
General| Scanner type | 2D |
|---|---|
| Yaw reading angle | -60 - 60 ° |
| Decoding standards | GS1 DataBar, Aztec Code, Data Matrix, MaxiCode, QR Code, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, MicroPDF417, PDF417 |
| Tilt reading angle | 0 - 360 ° |
| Optical sensor resolution | 752 pixels |
| Light levels (direct sunlight) | 0 - 86000 lx |
| Bluetooth | No |
| Cable length | 2 m |
| Standard interfaces | USB |
| Input voltage | 5 V |
| Power consumption | 350 mA |
| Dimensions (WxDxH) | 76 x 109 x 151 mm |
| Certification | China RoHS EU RoHS |
| Product color | White |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Weight | 306.2 g |
|---|
Provides overview of manual content, connection, programming, specs, and references.
Explains symbols used in the manual for key issues and procedures.
Sets time limit for reading the same linear label again consecutively.
Specifies time with no reads before scanner enters sleep mode.
Lists LED and beeper indications for scanner functions, errors, and modes.
Details how to capture and transfer images from the scanner.
Selects the scanner's communication interface type (RS-232, USB, etc.).
Settings specific to the RS-232 serial interface.
Instructions for setting up the USB COM interface.
Adds custom characters as prefix or suffix to scanned barcode data.
Identifies barcode symbology type and can be appended to data.
Converts scanned barcode data to all lower or all upper case.
Configuration options for the UPC-A barcode symbology.
Configuration options for the Code 39 barcode symbology.
Configuration options for GS1 DataBar Omnidirectional symbology.
Configuration options for the PDF 417 barcode symbology.
Configuration options for the Datamatrix barcode symbology.
Configuration options for the QR Code barcode symbology.
Enables or disables the use of pharmacy patterns for decoding.
Controls the method of reading inverse labels (white on black).
Adds custom characters as prefix or suffix to scanned barcode data.
Details scan volume, rate, resolution, depth of field, and contrast.
Details pin assignments for RS-232 and USB interface cables.
Lists default settings for various barcode symbologies.
Lists commands the scanner responds to from host systems.
To Next Page
