Datalogic Magellan 800i User Manual

Interface Related Features
34 Magellan
TM
800i
RS-232 Interface Features — cont.
Beep on ASCII BEL
Enables/disables ability of scanner to beep (sound a good read tone) on receiving an ASCII BEL
(07 hex).
Beep on Not on File
Enables the scanner to cause beep to be sounded on receiving not-on-file (NOF) command.
START / END
PROGRAMMING BAR CODES
Disable Beep on ASCII BEL
DEFAULT
Enable Beep on ASCII BEL
069D00(CR)
069D01(CR)
START / END
PROGRAMMING BAR CODES
Beep on Not On File = Disable
Beep on Not On File = Low Volume
DEFAULT
Beep on Not On File = Medium Volume
Beep on Not On File = High Volume
045100(CR)
045101(CR)
045102(CR)
045103(CR)

Datalogic Magellan 800i Specifications

General

Scanner type	2D
Yaw reading angle	-60 - 60 °
Decoding standards	GS1 DataBar, Aztec Code, Data Matrix, MaxiCode, QR Code, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, MicroPDF417, PDF417
Tilt reading angle	0 - 360 °
Optical sensor resolution	752 pixels
Light levels (direct sunlight)	0 - 86000 lx
Bluetooth	No
Cable length	2 m
Standard interfaces	USB
Input voltage	5 V
Power consumption	350 mA
Dimensions (WxDxH)	76 x 109 x 151 mm
Certification	China RoHS EU RoHS
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	306.2 g