Datalogic Magellan 800i - Length Control; Code 93 Length 1, Length 2 Programming Instructions

Code 93
Product Reference Guide 113
Code 93 — continued
Length Control
Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a
bar code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding— When variable length decoding is enabled, the scanner will
decode a bar code if the label length falls in the range of the configurable minimum and maxi-
mum length.
Code 93 Length 1, Length 2 Programming Instructions
See page 156 for detailed instructions on setting this feature.
START / END
PROGRAMMING BAR CODES
Variable Length Decoding
DEFAULT
Fixed Length Decoding
068700(CR)
068701(CR)
NOTE
For Code 93 bar codes, only the data characters
are included in the length calculations.
START / END
PROGRAMMING BAR CODES
DEFAULT SETTING FOR THIS FEATURE: 01
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 50
0685(CR)
0686(CR)