Datalogic Magellan 800i - Intercharacter Delay

Interface Related Features
32 Magellan
TM
800i
RS-232 Interface Features — cont.
Intercharacter Delay
Specifies a delay between the end of one character and the beginning of the next in 10-millisec-
ond increments. This delay is inserted after each data character transmitted. If the transmission
speed is too high, the system may not be able to receive all characters. You may need to adjust
the delay to make the system work properly.
START / END
PROGRAMMING BAR CODES
Inter-Char Delay = No Delay
DEFAULT
Interchar Delay = 10 msec
Interchar Delay = 20 msec
Interchar Delay = 30 msec
Interchar Delay = 40 msec
Interchar Delay = 50 msec
Interchar Delay = 60 msec
Interchar Delay = 70 msec
009C00(CR)
009C01(CR)
009C02(CR)
009C03(CR)
009C04(CR)
009C05(CR)
009C06(CR)
009C07(CR)