Datalogic Magellan 800i User Manual

Product Reference Guide 59
Chapter 5
Symbologies
The scanner supports the following symbologies (bar code types). Options for each symbology
are included in this chapter.
Factory Defaults— for the standard RS-232 interface are indicated in bold text throughout
this section. Reference
Appendix D, Default Settings for default exceptions for your interface.
UPC-A
Disable/Enable UPC-A
When disabled, the scanner will not read UPC-A bar codes.
• UPC-A
• Code 32 Italian
Pharmacode
• UPC-E • Code 128
• EAN-13 • Interleaved 2 of 5
• EAN-8/JAN-8 • Codabar
• GS1 DataBar Omnidirectional /
Stacked Omnidirectional
• Code 93
• GS1 DataBar Expanded /
Expanded Stacked
• MSI/Plessey
• GS1 DataBar Limited • Standard 2 of 5
• Code 39 • Code 11
START / END
PROGRAMMING BAR CODES
Disable UPC-A
Enable UPC-A
DEFAULT
02D000(CR)
02D001(CR)

Datalogic Magellan 800i Specifications

General

Scanner type	2D
Yaw reading angle	-60 - 60 °
Decoding standards	GS1 DataBar, Aztec Code, Data Matrix, MaxiCode, QR Code, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, MicroPDF417, PDF417
Tilt reading angle	0 - 360 °
Optical sensor resolution	752 pixels
Light levels (direct sunlight)	0 - 86000 lx
Bluetooth	No
Cable length	2 m
Standard interfaces	USB
Input voltage	5 V
Power consumption	350 mA
Dimensions (WxDxH)	76 x 109 x 151 mm
Certification	China RoHS EU RoHS
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	306.2 g