Datalogic Magellan 800i - Code 128 Conversion to Code 39; Code 128 Stitching

Symbologies
98 Magellan
TM
800i
Code 128 — continued
Code 128 Conversion to Code 39
Enables/disables expansion of Code 128 labels to Code 39. When enabled, the label identifier
for a Code128 label shall be set to Code 39 and all Code 39 formatting control shall be applied
to the label.
Code 128 Stitching
Enables/disables stitching for Code 128 labels. When parts of a Code 128 bar code are pre-
sented to the scanner with this feature enabled, the bar code parts will be assembled by the scan-
ner’s software, and the data will be decoded if all bar code proofing requirements are met.
START / END
PROGRAMMING BAR CODES
Disable
DEFAULT
Enable
069600(CR)
069601(CR)
START / END
PROGRAMMING BAR CODES
Disable Code 128 Stitching
Enable Code 128 Stitching
DEFAULT
06A800(CR)
06A801(CR)